Home » QUALIFIED MEMBERSHIP AGREEMENT

QUALIFIED MEMBERSHIP AGREEMENT

This Membership Agreement (Agreement) is entered into on the date of receipt of the qualified membership fee between Institut für Kybernetik und Geo-politische Analyse / Institute for Cybernetics and Geo-political Analysis / ICGA,
ZVR# 1951381613, based in Schachnerstraße 7, 1220 Vienna, Austria (Association), and the Member.

WHEREAS, Association owns the license rights for Nemesis software core platform (Software);and
WHEREAS, Member is desirous of becoming an Association’s member to obtain the rights for Software use;
WHEREAS, for the good and valuable consideration, the receipt of which is hereby acknowledged, Association is willing to accept the applicant as qualified Member of the Association; and
WHEREAS, Member is willing to accept the Membership agreement under the conditions set forth set forth above.

NOW, THEREFORE the parties agree as follows:

  1. LICENSE GRANTED

Subject to the terms and conditions of this Agreement and in consideration of qualified Member’s obligation to pay a membership fee of USD 19,99 per month. The payments are to be made in full before by Member before the end of each respective year.

Such fees which may be adjusted from time to time by the Association due prior notice of the Member. Association hereby grants, and Member hereby accepts, a perpetual, nontransferable license to use the Software in object code form world-wide.

Association also grants permission to Member to further process the data obtained from the Software but requires referencing of the source. The parties agree that Association shall continue to own all right, title and interest in and to the Software and all intellectual property rights embodied therein or related thereto including, but not limited to, the source and object codes and any customizations, updates and corrections to the Software. Except as expressly provided herein, no intellectual property rights are granted to Member by implication, estoppel, or otherwise.

Member will safeguard the Software and its related materials with that degree of normal due care commensurate with reasonable standards of industrial security for the protection of trade secrets and proprietary information so that no unauthorized use is made of them and no disclosure of any part of their contents is made to anyone other than Member’s employees, agents or consultants whose duties reasonably require such disclosure, or as necessary in the ordinary course of business. Member shall make all such persons fully aware of their responsibility to fulfill the obligations of Member under this Agreement.

  1. SOFTWARE PROVIDED “AS IS”

Association warrants that it has the right to provide the Software to Member hereunder. Otherwise, Association provides the Software to Member “as is.” Association makes no warranties or representations that the Software is free of errors or defects, or that it adequately performs the functions it is intended to perform. Member shall test the Software to insure its acceptability for Member’s purpose prior to putting the Software in productive use.

Association is under no obligation to update or correct defects or errors in the Software. If Association does provide Member with updates or corrections, the terms and conditions of this Agreement shall apply.

THE SOFTWARE IS PROVIDED “AS IS” AND ASSOCIATION MAKES NO OTHER WARRANTIES WITH RESPECT TO THE SOFTWARE, INCLUDING BUT NOT LIMITED TO THOSE OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

  1. WARRANTIES OF MEMBER

Related to customizations, updates and/or corrections of Member to the Software, Member represents and warrants that:

 

(i)

Member has all intellectual property rights necessary to produce customizations, updates and/or corrections to the Software;

 

 

(ii)

Member does not infringe the intellectual property rights of any third party;

 

 

(iii)

Member will make any customizations or enhancements to the Software under this Agreement in accordance with industry standards and in a professional and workman-like fashion;

 

 

(iv)

Following completion of any customizations or enhancements to the Software, such will remain free from material programming errors and defects in workmanship and materials, and will substantially conform to the specifications and any related documentation for ninety (90) days (“Warranty Period”). If material programming errors are discovered during the Warranty Period, Member shall promptly remedy such errors at no additional expense to Association.
  1. PROPERTY RIGHTS AND RESTRICTIONS ON USE

Member recognizes that the Software, and customizations, updates or corrections, if any, are the property of, and all rights thereto, are owned by Association. Member also acknowledges that such are a trade secret of Association, are valuable and confidential to Association, and that its use and disclosure must be carefully and continuously controlled.

Title to the license rights of the Software, and customizations, updates or corrections, if any, shall at all times remain with Association.

Member shall keep the Software, and customizations, updates and/or corrections, if any, free and clear of any claims, liens and encumbrances attributable to the use or possession of the Software by Member. Any act of Member, whether voluntarily or involuntarily, purporting to create a claim of encumbrance shall be void.

The Software is for the sole use of Member and shall be used only for the purpose set forth in this Agreement.

Member shall treat the Software, and customizations, updates and/or corrections, if any, as confidential and proprietary, and shall protect it in the same manner that it protects the confidentiality of its own information. While this Agreement is in effect, or while Member has custody and possession of the Software, Member will not:

 

(i)

provide or make available the Software to any person or entity other than employees of Member who have a need to know consistent with Member’s use thereof under this Agreement; or

 

 

(ii)

create or attempt to create, or permit others to create or attempt to create, by disassembling, reverse engineering or otherwise, the source program or any part thereof from the object program or other information made available to Member pursuant to this Agreement.

Member agrees to promptly notify Association if it obtains information as to any unauthorized possession, use or disclosure of the Software by any person or entity, and further agrees to cooperate with Association in protecting Association’s proprietary rights.

If Member, its officers, agents, or employees, breach any provision of this Agreement, such breach must be cured within thirty (30) days of receipt of Association’s written notice describing such breach. If such breach is not cured within the thirty (30) days after receipt of the notice, Member shall pay Association reasonable monetary payments for loss and/or damages related to such breach.

  1. TERM

 

a)

The license subject to this Agreement shall continue until Member terminates the contract. There is no minimum contract term of this license. The contract can be terminated at any time, but has to be terminated at least one month before the next payment is due.

 

 

b)

Association and Member have the right to terminate the contract immediately in case of non-performance of the contract terms.

In the event of termination of this Agreement pursuant to the above, Association shall have the right to take possession of the Software.

Termination of this Agreement shall not relieve either party of its obligations pursuant to Sections 2, 3, 4, 5 and 6 hereof.

  1. INDEMNIFICATION AND LIMITATION OF LIABILITY

Member agrees to indemnify and hold Association harmless from and against all loss, cost, expense or liability (including reasonable attorney’s fees) arising out of a claim by a third party against Association based upon Member’s use of the Software.

Member agrees to indemnify and hold Association harmless from any loss or damages to Association related to, or associated with Member’s customizations, updates and/or corrections to the Software.

Member agrees to indemnify and hold Member harmless, and defend at its expense, any action brought against Association, its officers, directors, employees, shareholders, legal representatives, agents, successors and assigns (“Association Indemnified Parties”) to the extent that it is based on a claim that the customizations, updates and/or corrections developed by Member infringe any intellectual property rights of any third parties.

Association shall have no liability to Member for any damage sustained by Member as a result of Member’s use of the Software, whether such damages would arise as a result of breach of contract, tort or otherwise. Member has tested the Software and relies on its own judgment in utilizing it.

Association warrants that the use of the initially provided Software will not infringe any patent, copyright, or trademark in the United States or elsewhere, and Association shall indemnify and hold Member harmless against any and all losses, damages and expenses, (including attorney’s fees and other costs of defending any infringement action) which Member may sustain or incur as a result of a breach of this warranty.

Obligations set forth herein are contingent upon the other party:

 

a)

Providing the indemnifying party with prompt written notice of any action brought against the other party; and

 

 

b)

The other party cooperating with the indemnifying party in the defense of any such action, and allowing the indemnifying party to control the defense and settlement of any such action at its expense;

Association shall have no obligation to defend any action or indemnify Member from damage if:

 

(i)

Member, in providing customizations, updates and/or corrections to the Software, infringes upon the intellectual property of any third party.

 

 

(ii)

Member is not using the most current version of the Software and the action would have been avoided without such combined use.

 

 

(iii)

Member has modified the Software in combination with other Software and the action would have been avoided without such combined use.

 

 

(iv)

Member is using the Software in combination with other Software and the action would have been avoided without such combined use
  1. FORCE MAJUERE

Either party shall be excused from failures or delays in delivery or performance hereunder if such failure or delay is attributable to causes beyond the reasonable control of the party, which makes such performance or delivery commercially impractical. In the event of any such delay, the time of delivery or performance and time of payment shall be extended for a period of time equal to the time lost by reason of such delay (unless otherwise specified in writing between the parties hereto).

  1. NOTICES

All notices shall be in writing and shall be deemed to be delivered when deposited in the United States Postal Services, postage prepaid, return receipt requested, or when sent by telegram, telex, or facsimile. All notices shall be directed to Member or to Association, its successors or assigns, at the respective addresses set forth on the signature page of this Agreement or to such other address as one party may, from time to time, designate by notice to the other party.

  1. RELATIONSHIP OF THE PARTIES

The parties to this Agreement are affiliated companies and this Agreement will not establish any relationship of partnership, joint venture, employment, franchise, or agency between the Parties. Neither Party will have the power to bind the other or incur obligations on the other’s behalf without the other’s prior written consent.

  1. PUBLICITY

A public press announcement related this Agreement may be made, but only if mutually agreed to in writing by the Parties.

  1. WAIVER

No waiver of any breach of any provision of this Agreement shall constitute a waiver of any prior, concurrent or subsequent breach of the same or any other provision hereof, and no waiver shall be effective unless made in writing and signed by an authorized representative of the waiving Party.

  1. COMPLETE AGREEMENT

This Agreement constitutes the complete and exclusive statement of this agreement between the parties hereto and supersedes any and all prior express implied agreements or understandings between the parties hereto concerning the subject matter hereof. No amendment, waiver or other alteration of this Agreement may be made except by mutual agreement in writing.

If any provision or provisions of this Agreement shall be held to be invalid, illegal or unenforceable, the validity, legality and enforceability of the remaining provisions shall not be affected thereby and the parties shall negotiate replacement provisions for those provisions which are held invalid, illegal or unenforceable which as closely as possible express the intent of those provisions.

  1. RESTRICTIONS OF TRANSFER

This Agreement and the rights and obligations under this Agreement shall not be transferable, sublicensable or assignable to any other person, firm or corporation by Member, without the express prior written consent of the Association. The rights and obligations of this Agreement shall insure to the benefit of and be binding upon the parties hereto, their successors and permitted assigns.

  1. GOVERNING LAW

This Agreement shall be construed in accordance with the laws of Austria.

  1. NO CONSTRUCTION AGAINST THE DRAFTER

The parties agree that this Agreement is the result of careful negotiations between sophisticated parties and thus any principle of construction or rule of law that provides that an agreement shall be construed against the drafter of the agreement in the event of any inconsistency or ambiguity in such agreement shall not apply to the terms and conditions of this Agreement.

  1. HEADINGS

The various headings in this Agreement are inserted for convenience only, and shall not affect the meaning or interpretation of this Agreement or any paragraph or provision hereof.

  1. CONSENT

By agreeing to the stated Qualified Membership Agreement the Member gives consent to become a Member of the Institute for Cybernetics and Geo-political Analysis.

  1. CONTACT

Institute for Cybernetics  and Geo-political Analysis
Prof. Dr. Stephan Unger
Director
e-mail: postemaster@icga-institute.org
Phone: +1 646 991 8501